Citaat van: zone2000 op ma 19 05 2008, 13:44:01
Hallo,
Ik werk met een aantal tekeningen die ongeveer 60 paperspaces (tabbladen) bevatten. Het bladeren tussen deze tabbladen gaat zeer traag.
Soms is de computer wel meer dan 10 seconden bezig voordat de pagina ervoor is.
Kan ik dit verbeteren? Ik heb een goede computer, dus daar kan het eigenlijk niet aan liggen.
Groeten,
Lars
Beste Lars,
Met de AutoCAD variabele Layoutregenctl kan men instellen,
of bij wisseling tussen de layouts de display-list opnieuw
opgebouwd wordt.
Met vriendelijke groet, HofCAD CSI
LAYOUTREGENCTL
Type: Integer
Saved in: Registry
Initial value: 2
Specifies how the display list is updated in the Model tab and layout tabs. For each tab, the display list is updated either by regenerating the drawing when you switch to that tab or by saving the display list to memory and regenerating only the modified objects when you switch to that tab. Changing the LAYOUTREGENCTL setting can improve performance.
0 The drawing is regenerated each time you switch tabs.
1 For the Model tab and the last layout made current, the display list is saved to memory and regenerations are suppressed when you switch between the two tabs. For all other layouts, regenerations still occur when you switch to those tabs.
2 The drawing is regenerated the first time you switch to each tab. For the remainder of the drawing session, the display list is saved to memory and regenerations are suppressed when you switch to those tabs.
The performance gain achieved by changing the LAYOUTREGENCTL setting is dependent on several factors, including the drawing size and type, the objects contained in the drawing, the amount of available memory, and the effect of other open drawings or applications. When LAYOUTREGENCTL is set to 1 or 2, the amount of additional memory used is the size of the Model tab's display list multiplied by the number of viewports in each layout for which the display list is saved.
If LAYOUTREGENCTL is set to 1 or 2 and performance seems slow in general or when you switch between tabs for which the display list is saved, consider changing to a setting of 0 or 1 to find the optimal balance for your work environment. For additional information about performance settings, see System tab (in the Options dialog box).
Regardless of the LAYOUTREGENCTL setting, if you redefine a block or undo a tab switch, the drawing is regenerated the first time you switch to any tab that contains saved viewports.