Hallo allemaal
Heb een vraag over de pmp files hier bij ons heeft iedereen een eigen PMP file directory.
gebruiker1/....enz./pmp
gebruiker2/....enz./pmp
wat doet dit bestand eigenlijk precies.
Je kunt deze opslaan bij je plotter .pc3 instelling.
Groet Jimmy
Ik heb even in de Help van AutoCAD gekeken, hierbij de info:
PMP (plot model parameter) files, attaching/detaching to/from PC3 files
You should perform a plotter calibration only if your drawings must be exactly to scale and your plotter or printer produces inaccurate plots.
You can adjust plotter calibration to correct scaling discrepancies, and you can add custom paper sizes for nonsystem plotters.
Calibration Files
Plotter calibration is an optional process. If your plotter meets the manufacturer's specifications for accuracy of scale, a 10-inch line in a drawing plotted at a scale of 1:1 should be exactly 10 inches long on paper. If you need to correct scaling discrepancies, you can adjust the plotter calibration. If your plotter provides a calibration utility, use that utility instead of the AutoCAD calibration utility so the calibration is available for all applications using the plotter.
To calibrate a plotter, you must specify the dimensions of a test rectangle, print the test rectangle, measure actual dimensions, and enter the actual measurements in the Calibrate Plotter wizard. AutoCAD calculates the necessary calibration for the plotter.
When you complete the Calibrate Plotter wizard, AutoCAD creates a plot model parameter (PMP) file to store the results of the calibration for each plot device. AutoCAD automatically attaches the resulting PMP file to the plotter configuration (PC3) file that you used to perform the calibration test.
Calibrating a plotter creates a plotter model parameter (PMP) file that contains calibration information. If the PMP file is not already attached to the plotter configuration file (PC3) you are editing, you must create that association so you can use the PMP file. If the plotter was calibrated from within the Add-a-Plotter wizard, the PMP file is already attached. You can use the Calibration and User Defined Paper Sizes option to add PMP files to and detach PMP files from the PC3 file. If you have more than one PC3 file for a device, you can attach the same PMP file to them using the Plotter Configuration Editor. Because PMP files are plotter specific, it's appropriate to attach only one PMP file to a PC3 file.
NoteYou should perform a plotter calibration only if your drawings must be exactly to scale and your plotter or printer produces inaccurate plots. Plotter calibration causes AutoCAD to rescale all plots sent to your plotter to correct errors in its hardware scaling. It is recommended that you use any calibration setting provided by your plotter instead of the AutoCAD setting.
Custom Paper Sizes
For a nonsystem plotter, you can choose the Add option to create a custom paper size or change the printable area of a standard or nonstandard paper size. Using the Custom Paper Size wizard, you can create a new paper size or select from a list of available paper sizes (from a PMP file). For a Windows system printer, use the Custom Properties option to adjust paper settings.
You can modify standard paper sizes to adjust the printable area to match a printer's capabilities. In the Plotter Configuration Editor, you cannot create custom paper sizes for Windows system printers, but you can correct errors in the printable area of standard paper sizes.
Richard
PMP staat voor Plotter Model Parameter
in dit bestand staan dus instellingen voor de plotter zoals het calibreren en informatie over custom papersizes. Dit is gelinkt aan een PC3 bestand.
Als je bij een bestaande plotter andere papierformaten wilt toevoegen krijg je ook de vraag of het tijdelijk is of dat de wijzigingen opgeslagen moeten worden in het een PC3 bestand.
Hallo allemaal
Heb een vraag over de pmp files hier bij ons heeft iedereen een eigen PMP file directory.
gebruiker1/....enz./pmp
gebruiker2/....enz./pmp
wat doet dit bestand eigenlijk precies.
Je kunt deze opslaan bij je plotter .pc3 instelling.
Vervolg vraag:
Eén standaard pmp en pc3 voor iedereen op het netwerk of zo laten zo als het nu gaat.(gebruiker1, gebruiker 2 enz.)
Voor standaardisatie binnen jouw firma is het beter als iedereen met dezelfde printerinstelleingen werkt, hoewel/echter/aan de andere kant/........................
De ene klant wil dit de andere dat, dus een echte standdard is niet echt bindend.
Soms is het handig en/of duidelijker een net iets andere print te maken dan de standaard.
Met andere woorden/ anders gezegd:
Er is geen eenduidig antwoord op jouw vraag, het hangt af van diverse omstandigheden binnen jouw firma.
Joop